Wire Spiral Machine
Product Code: BRS-000071-SPM
Bersel Makine manufactures wire spiral machines. Wire spiral machine features:
Technical specifications
Driving speed 90 m / min. and speed will be adjusted with of frequency control.
Max. spiral diameter 1250mm (without step)
Max. spiral diameter 700mm (stepped)
Max. step 250 mm
Center support shaft length 600 mm
Wire that is opened from the coil is straightened with horizontal and vertical rollers
The drive motor is 11 kW frequency controlled
can be entered value of spiral diameter, cutting and caliber knowledge from the console.
Cutting and Step driven by hydraulic.
After spiral diameter and step set correctly, automatically produces for a specified adjusted sprial numbers and stop.
Hydraulics are provided by the power arm
All rollers and knives that is touched with wire is produced from watered material.
Center pin driven by the engine.
Balance plate is automatically removed anchor with encoder
Engines:
Driving engine: 11 Kw.
Hydraulic engine: 4 Kw. (max pressure 150 bar, 4 lt / min)
Balance plate: 0,75 Kw
Caliber engine: 1 Kw.